Skip To Main Content

Arduino Sensor Shield V5 0 Manual Online

You are prototyping a robot, building a weather station, or teaching a class. Do not use it if: You are building the final, compact product, or you need high-current motor control.

// Sweep back for (pos = 180; pos >= 0; pos--) myservo.write(pos); delay(15); int distance = readUltrasonic(); Serial.print("Angle: "); Serial.print(pos); Serial.print(" cm: "); Serial.println(distance);

Place the shield over the pins. Press down evenly on the edges. You should hear a "click" as the plastic clips (if present) engage. arduino sensor shield v5 0 manual

If you are diving into the world of Arduino robotics or environmental sensing, you have likely encountered a frustrating problem: managing wires . Connecting a single LED or a button is easy. Connecting 10 sensors—a ultrasonic distance sensor, a servo motor, a temperature sensor, and an LCD display—results in a nest of jumper wires that looks like a bowl of tangled spaghetti.

This manual will serve as your complete reference guide. We will cover the hardware overview, the pin-by-pin breakdown, power management, common troubleshooting issues, and a step-by-step example project. The Sensor Shield V5.0 is a passive expansion board designed specifically for the Arduino Uno R3 (as well as the Arduino Leonardo and similar form factors). It sits directly on top of your Arduino, stacking via the standard headers. You are prototyping a robot, building a weather

void setup() Serial.begin(9600); pinMode(trigPin, OUTPUT); pinMode(echoPin, INPUT); myservo.attach(10); // Servo is on pin 10 (SERVO1)

#include <Servo.h> Servo myservo; const int trigPin = 8; const int echoPin = 9; int pos = 0; Press down evenly on the edges

The reset button on the shield should align perfectly with the reset button on the Arduino. The USB port on the Arduino should stick out the "short side" of the shield.

You are prototyping a robot, building a weather station, or teaching a class. Do not use it if: You are building the final, compact product, or you need high-current motor control.

// Sweep back for (pos = 180; pos >= 0; pos--) myservo.write(pos); delay(15); int distance = readUltrasonic(); Serial.print("Angle: "); Serial.print(pos); Serial.print(" cm: "); Serial.println(distance);

Place the shield over the pins. Press down evenly on the edges. You should hear a "click" as the plastic clips (if present) engage.

If you are diving into the world of Arduino robotics or environmental sensing, you have likely encountered a frustrating problem: managing wires . Connecting a single LED or a button is easy. Connecting 10 sensors—a ultrasonic distance sensor, a servo motor, a temperature sensor, and an LCD display—results in a nest of jumper wires that looks like a bowl of tangled spaghetti.

This manual will serve as your complete reference guide. We will cover the hardware overview, the pin-by-pin breakdown, power management, common troubleshooting issues, and a step-by-step example project. The Sensor Shield V5.0 is a passive expansion board designed specifically for the Arduino Uno R3 (as well as the Arduino Leonardo and similar form factors). It sits directly on top of your Arduino, stacking via the standard headers.

void setup() Serial.begin(9600); pinMode(trigPin, OUTPUT); pinMode(echoPin, INPUT); myservo.attach(10); // Servo is on pin 10 (SERVO1)

#include <Servo.h> Servo myservo; const int trigPin = 8; const int echoPin = 9; int pos = 0;

The reset button on the shield should align perfectly with the reset button on the Arduino. The USB port on the Arduino should stick out the "short side" of the shield.